The Portable Steel DEF Transfer Tank is DEF Compliant, with Heated Tank Options, Designed for Diesel Exhaust Fluid Storage, Transfer and Dispense.
These DEF tanks are secure and enclosed mobile solutions that are ISO 22241 compliant for use with DEF. These unit come with an easy to lift, hinged lid which keeps both the dispense equipment and the diesel exhaust fluid free from dust and debris, and the locking arm keeps the lid open while the DEF Transfer Tank is in use. The portable unit has a tamper-proof locking system for complete security. This unique storage and dispense system is housed in heavy-duty powder-coated carbon steel with a rust-resistant finish. The outside steel tank features a visible fluid monitoring strip that allows the operator to monitor DEF levels inside the tank.
Inside the forklift ready DEF Tank is all the dispense equipment needed. The unit arrives assembled and ready to use. Under the lockable and secure lid, the DEF unit contains a Self-Priming Diaphragm Pump, 20 ft. Dispense Hose, 4 ft. Suction Hose, Auto Shut Off Nozzle, High Flow Valve and High Flow Dispense Coupler. And for ease of operator use, the DEF Port will only accept a DEF Nozzle.
Portable Steel DEF Tanks Specifications
- TD12V Self-Priming DEF Approved Diaphragm Pump
- 20 ft. Dispense Hose
- 4 ft. Suction Hose
- Auto Shut Off Nozzle with Swivel
- High Flow Valve
- High Flow Dispense Coupler
- DEF Port will only accept DEF Nozzle
- Forklift Accessible for Easy Transport
- Lockable Lid for Complete Security
- Front View Strip for Fluid Level Visibility
Heated Steel DEF Tank Options
- 120vac 475w Heating System
The Heated Steel DEF Tanks are equipped with a 120 vac 475 watt heating system designed to prevent diesel exhaust fluid from freezing in minimum ambient conditions down to 40⁰F. The heating system consists of two low watt density, low profile, waterproof, pressure laminated heater pads. One heater pad is attached directly to the exterior of the inner polyethylene DEF Tank and the second heater pad is attached directly to the underside of the Equipment Tray. The DEF heaters are connected to an Electronic Temperature Controller that is also located on the underside of the Equipment Tray. This Temperature Controller will automatically energize and de energize both heaters based upon the ambient air temperature being monitored and measured inside of the Tank Enclosure. The entire heating system becomes functional when a 120vac power supply is plugged into the Power Receptacle on the side of the DEF Transfer Tank Unit. A 20 foot industrial grade extension cord is included with the system. The heating system will automatically switch on and remain switched on when the Temperature Controller is registering an ambient air temperature below 30⁰F inside of the tank. The heating system will automatically switch off and remain switched off during all time periods when the Temperature Controller is registering ambient air temperatures above 30⁰F inside the tank.
Unheated Steel DEF Tanks
The Unheated Steel Transfer Tanks include a TD-12V Pump, 20′ Dispense Hose and 4′ Suction Hose with Detachable Steel Drum/Tote Bracket, Stainless Steel Auto Nozzle with Swivel & Integrated Nozzle Holder, and 4-Pin Closed System.
|Capacity||20 Gallons||60 Gallons||100 Gallons|
Heated Steel Transfer Tanks
The Heated Steel DEF Transfer Tanks are equipped with a 120 vac 475W Heating System, and include a TD-12V Pump, 20′ Dispense Hose and 4′ Suction Hose with Detachable Steel Drum/Tote Bracket, Stainless Steel Auto Nozzle with Swivel & Integrated Nozzle Holder, and 4-Pin Closed System.
|Capacity||60 Gallons||100 Gallons|
|Heated||Yes, 120 vac 475W Heating System|