Large Crusher Stand with Reservoir

The Large Oil Filter Crusher Stand with Reservoir requires 23" wide x 23" deep of floor space.

Large Crusher Stand with ReservoirLarge Crusher Stand with ReservoirLarge Crusher StandDimensions


The 37"H Large Crusher Stand is manufactured to be used with Oil Filter Crushers (WO7715BJTT12) and (WO8215BJTT25).

  • Designed for use with WO7715BJTT12 and WO8215BJTT25 oil filter crushers
  • Industrial grade steel
  • Drain shelf for storing filters
  • 2" NPT drain for piping to other storage vessels
  • Accommodates a 30-gallon drum
  • Vibration pads and provisions for securing to the floor
  • Part No: WO7550BJCS

Easy Installation

DO NOT INSTALL CRUSHER STAND WITHOUT VIBRATION PADS

  1. Bolt crusher stand with vibration pads to the floor (bolts not provided). Tightenbolts firmly, approximately 1 to 2 turns past hand tight – do not overtighten.
  2. Place crusher on stand.
  3. Bolt crusher to stand using four 1/2" x 2" bolts, 1/2" nuts, and 1/2" locking washers (provided). Tighten firmly, approximately 1 to 2 turns past hand tight – do not overtighten.
  4. Place waste oil recovery drum underneath crusher stand.

newspaper templates - theme rewards